Omron ZW-7000 Series - Extending Fiber Cable

Installation
ZW-7000/5000
User's Manual
2
Installation and Connections
63
Extending fiber cable
To extend the fiber cable on the Sensor Head, use an extension fiber cable and connecting adapter.
When extending the fiber cable, be sure to set the fiber cable len
gth and calibrate the Sensor Head after
connecting the extension fiber cable.
l ZW-7000 Series
Extension fiber cable (option)
Connecting adapter (option)
Model Length
ZW-XF7002R 2 m
ZW-XF7005R 5 m
ZW-XF7010R 10m
ZW-XF7020R 20m
ZW-XF7030R 30m
Model
ZW-XFCM
Extension fiber cable
ZW-X70□□R:
(2 m/5 m/10m/20m/30m)
Sensor Head
fiber cable
Connection adaptor
ZW-XFCM
Nameplate
Groove
When connecting the fiber cable, grasp by the bushing part
of fiber. Align the convex section of fiber cable to the groove
of the adapter and insert it until there is a clicking sound.
Convex section
Fiber bush part
Fiber connector