Omron ZW-7000 Series - Setting Filters

Setting the Output Conditions
136
ZW-7000/5000
User's Manual
Setting Filters
Set the filter condition when filtering information obtained from the sensor before output.
The following types of filters can be set depending on purpose.
Profile with no
filter setting
0
Median filter
[MEDIAN]
Average filter
[AVE]
Differ filter
[DIFFER]
Frequency filter
[FREQ]
Waveform when
filter is not set
Lowpass filter [LOPASS]
Highpass filter [HIPASS]
Bandpass filter [BDPASS]
Displacement
Smooth
Spike-like changes are
removed.
Displacement
Changes are smoothed
out.
Changes are extracted to
eliminate displacement value.
Sudden changes are removed.
Gradual changes are removed.
A given change is detected.
Three frequency variations
are mixed.