Omron ZW-7000 Series - Perform the Zero Reset; Zero Reset

Perform the Zero Reset
92
ZW-7000/5000
User's Manual
3-4 Perform the Zero Reset
Zero reset
What is Zero Reset?
This function allows resetting the measured value to “0” at any timing during measurement in the RUN mode.
The measured value can be displayed and output as a positive or negative deviation (tolerance) from the set
reference v
alue “0”.
Example 1: Use the height of the sensing object as a reference value and the deviation is the measured value.
Example 2: Use the measured value according to the height of the sensing object (set 10 as an offset value)
+0.5 (HIGH threshold value)
-0.5 (LOW threshold value)
Sensor head
0
(reference value)
Sensing
object
10
+10.5 (HIGH threshold value)
+9.5 (LOW threshold value)
Sensor head
Sensing
object