Omron ZW-7000 Series - Displaying measured values in graphs

Perform the Zero Reset
ZW-7000/5000
User's Manual
93
3
Basic Operation
Example 3: Measure the level difference of the sensing object (execute zero reset at every measurement)
The zero reset function also allows setting the reference value to the hold value for a hold measurement or any
valu
e other than zero.
Setting the Zero Reset p.152 p.230
Executing Zero Reset
1 Place the reference sensing object in
position.
2 Press the key.
The ZERO indicator illuminates and the current
measured va
lue is registered as 0.
Sensor head
Zero reset
executed
Zero reset
executed
Zero reset
executed
Direction of movement
This step is
measured.