Omron ZW-7000 Series - Accessories

Specifications and External Dimensions
272
ZW-7000/5000
User's Manual
Accessories
Extension fiber cable
l ZW-XF7002R/XF7005R/XF7010R/XF7020R/XF7030R
• Secure a minimum bending radius (R) for the fiber cable that is at least as large as the specification value.
A bending radius smaller than the specification value could cause da
mage to the fiber cable.
• When an extension fiber cable of 5 m or longer is connected, the setting rage of the
measurement cycle (exposure
time) changes. For details, refer to "Setting Measurement Cycle" in this manual.
Item Specifications
ZW-XF7002R ZW-XF7005R ZW-XF7010R ZW-XF7020R ZW-XF7030R
Applicable Sensor
Controller
ZW-7000 @
Applicable Sensor Head ZW-S70 @@
Ambient temperature Operation: 0 to 50 ° C, Storage: -15 to +60 ° C
(with no icing or condensation)
Ambient humidity Operation, storage: 35 to 85%RH (with no icing or condensation)
Vibration resistance
(destructive)
10 to 55 Hz (half amplitude 0.35 mm), 50 mins in each of X/Y/Z directions
Shock resistance
(destructive)
150 m/s
2
, 6 direction, 3 times each (up/down, left/right, forward/backward)
Fiber length 2 m 5 m 10 m 20 m 30 m
Material Cable sheath: PVC, Connector: PBT, Connection adapter: PEI
Fiber cable minimum
bending radius
20 mm
Weight Approx. 25 g Approx. 45 g Approx. 70 g Approx. 120 g Approx. 160 g
Accessories Connection adapter (ZW-XFCM), 2 Fiber cable protective cap, 2 straps. Instruction Sheet, Precautions
* The following table lists cable lengths per models.
Ty pe
Specification
L（mm）
2m
5m
ZW-XF7002R
ZW-XF7005R
（Unit： mm）
(7.7)
2000＋40/0
5000＋100/0
10mZW-XF7010R
10000+200/0
20mZW-XF7020R
20000+400/0
30mZW-XF7030R
30000+600/0
(7.7)
Fiber connector
(Sensor head side)
(25) (40)
(12.6)
2-0.7 Dia.
12-0.125 Dia.
4.6
Fiber cable (3.0 Dia.)
L *
Serial number label
Name plate
(25)
(40)
(30)
(60)(25.4)
(12.6)
Fiber connector
(Controller side)
2-0.7 Dia.
12-0.125 Dia.
4.6
Connection adapter:ZW-XFCM
9.8
18.9
14.9
4
20
Important