Omron ZW-7000 Series User Manual

Setting the Banks
ZW-7000/5000
User's Manual
237
Sensor controller operations
7
Saving the Bank/System Settings
Save the bank/system settings to the Sensor Controller.
• The settings of all banks are saved regardless of the currently selected bank number.
• After you have made or changed settings, be sure to save the setup data. All settings will be deleted if you turn the
power
OFF without saving the data.
Here is an explanation of the procedure for saving the bank/system settings.
Operating procedure
Steps Key operation Display Description
1 Press and hold the key for two seconds to enter the FUNC
mode.
2 Press the / keys to select “SYSTEM” and press the
key.
3 Press the / keys to select “SAVE” and press the
key.
4 “OK/CAN” is displayed on the sub-display.
Press the key to save the settings or the key to
cancel.
5 Press the key for two seconds to enter the RUN mode.
Important

Omron ZW-7000 Series Specifications

General

Brand	Omron
Model	ZW-7000 Series
Category	Accessories
Language	English