Digital Displays
198
ZW-7000/5000
User's Manual
7-3 Digital Displays
The theme displayed on the main or sub-display varies depending on the currently selected operating mode.
The following table lists the theme displayed, when turning the Sensor C
ontroller ON, or in the RUN or FUNC
mode.
Alphebetical and symbolic notation
Alphabet characters and symbols are displayed on the main and sub-display as follows:
Operation mode Main display (upper line, in red) Sub-display (lower line, in green)
When turning ON The Sensor Controller model name, “ZW-7/ZW-5”
appears
.
During the initialization, “INIT” is displayed.
The system enters the RUN mode after displaying “INIT” for a few seconds.
RUN mode The task measurement result appears.
The task to display can be toggled.
Changing Display Details p.204
Press the / key to cycle through the sequence
of the HIGH and LOW threshold values, analog output
(vol
tage/current), judgment result, resolution (the max. and
min. values for 1-min measured value), amount of emitted
light, distance (Sensor Head to the object to measure),
effective bank, displayed task, in descending or ascending
order. Online status, Link status, Tag link status, Internal
logging status, and Amount of received light in descending
or ascending order.
Press and hold the key for two seconds or more to switch between the RUN and FUNC modes.
FUNC mode Press the / keys to cycle through the
function names in descending or ascend
ing order
.
When reaching the lowest layer, the setting value
displayed on t
he main display appears.
A B C D E F G H I J K L M
A B C D E F G H I J L M
N O P Q R S T U V W X Y Z
N 0 P Q R S T U V W X Y Z
- / %
Resol
ution
- / *O
To Next Page
Loading...
