Omron ZW-7000 Series - Troubleshooting

Basic Operation Flow
24
ZW-7000/5000
User's Manual
Functions used
during operation
Operations and
settings according
to need
When having
trouble with setting
When you need
help
Setting Threshold Value
Switching Banks
Executing Zero Reset
Changing Material Settings
Changing Exposure Time Control
Mode Settings
Setting Filter
When the Sysmac error status is
displayed
When an error message is
displayed
When it does not work correctly
Setting I/O (analog/judgment)
Using EtherCAT Communications
EtherNet/IP Communications
Using Ethernet/
RS-232C Communications
Setting the Banks
Setting the System Environment
3-6 Setting Threshold Value
2-1 Parallel I/O connection (*)
3-1 EtherCAT Connection (*)
4-1 EtherNet/IP Connection (*)
5-1 No-protocol Connection (*)
3-4 Bank Switching
3-5 Perform the Zero Reset
Section 3 Basic Operation
4-4
Setting the Banks
4-5
Setting the System
4-2
Setting Measurement Items
4-1
Setting Sensing
4-3
Setting the Output Conditions
Section 4 Settings for Functions
Section 4 Settings for Functions
6-1
Error Messages (*)
6-1
Error Messages (*)
7-2
Troubleshooting
Section 7 Troubleshooting
(*) Refer to the ZW-7000/5000 series Confocal
Fiber Type Displacement Sensor User's
Manual for Communications Settings (Cat
No. Z363).