Setting the Banks
ZW-7000/5000
User's Manual
235
Sensor controller operations
7
Changing the Bank Mode
Setting the Bank Mode p.168
As an example, here is an explanation of the procedure for selecting the “NORMAL” bank mode setting.
Operating procedure
Steps Key operation Display Description
1 Press and hold the key for two seconds to enter the FUNC
mode.
2 Press the / key to select BANK, then press the key.
3 Press the / keys to select “BK.MODE” and press the
key.
4 Select the bank data.
NORMAL: NORMAL
JUDGE: JUDGMENT
The current setting value is displayed on the sub-display.
Press / key to enter editing mode and the sub-display blinks.
In this example, select “NORMAL” and press the
key.
5 Press the key for two seconds to enter the RUN mode.
To Next Page
Loading...
Need help?
General
