Control input signal with PC tool
ZW-7000/5000
User's Manual
177
5
Convenient Functions
5-5 Control input signal with PC tool
Following input signal can be controlled with PC tool.
•LIGHT-OFF
• TIMING
• RESET
•ZERO
Multi view Explore : [Device Group]| [(Sensor Name)] (right click)| [Sensing monitor]
Multiview Explorer : [Device Group]| [(Sensor Name)] (double click)
→ Edit Window : [Online]-[Monitoring]-[Sensing monitor start]
1
[I/O input] is opened.
2
If each button is clicked, the Sensor
Controller is controlled as corresponding
input signal is turned ON.
While the button is clicked , corresponding input
sign
al is status ON.
If the button is clicked again, the input signal is
tu
rned
OFF.
Some adjustments can only be made while in FUNC mode.
When in RUN Mode, [I/O input] is not displayed.
Button Effect
LIGHT-OFF The measurement LED is turned OFF.
TIMING The TIMING input is turned ON.
RESET The RESET input is turned ON.
ZERO The ZERO input is turned ON.
Note
To Next Page
Loading...
