Installation
58
ZW-7000/5000
User's Manual
Remove the Fiber cable
ZW-7000 Series
If you have the bush section of fiber cable, that part may be out of place.
Make sure to have the fiber connector section.
ZW-7000 Series
1
Turn the threaded section of the fiber connector counter-clockwise. When the screw comes off,
pull the cable out.
1
When you remove the fiber connector, make sure to
have the black part of the connector which indicated
the right figure.
Have the fiber connector (black part)
illustrated under figure, and then pull out
the direction of the arrow.
Important
To Next Page
Loading...
