Omron ZW-7000 Series - EMC Directive Conformity

Specifications and External Dimensions
278
ZW-7000/5000
User's Manual
Secure a minimum bending radius (R) for the cable that is at least as large as the specification value. If the bending
radius is smaller than the specification value, this can cause damage to the cable.
Parallel cable
l ZW-XCP2E
Secure a minimum bending radius (R) for the cable that is at least as large as the specification value. If the bending
radius is smaller than the specification value, this can cause damage to the cable.
EMC Directive Conformity
Item Specifications
Applicable Controller ZW-7000 @ /ZW-5000 @
Ambient temperature Operation: 0 to 50 ° C, Storage: -15 to +60 ° C
(No freezing and condensation)
Ambient humidity Operation/storage: 35 or 85% RH (No condensation)
Dielectric strength 1000 VAC, 50/60 Hz, 1 min
Insulation resistance 20 M Ω (by 250 VDC megger)
Vibration resistance (destructive) 10 to 55 Hz (half amplitude 0.35 mm), 50 mins in each of X/Y/Z directions
Shock resistance (destructive) 150 m/s
2
, 6 direction, 3 times each (up/down, left/right, forward/backward)
Material Cable sheath: PVC
Cross section of flat cable AWG28
Core wire pitch 1.27 mm
Cable minimum bending radius 5.5 mm
Weight Approx. 150 g
Accessories Instruction Manual
CE Marking Applicable directive Safety category
Low voltage directive EMC directive
Conformed Not applicable Conformed B
Important
(Unit: mm)
7
6
(13.1)
2110
+140
0
(35.45)
A1B1
A16
B16
Important