Omron ZW-7000 Series - Setting the Noise Cut Level

Setting Sensing
118
ZW-7000/5000
User's Manual
Setting the Noise Cut Level
The setting a larger value than the noise level, the noise can be cut.
 Multiviewer Explore : [Bank] | [(Bank Data Name)] (double click)
→ Edit pane : [Sensing setting] icon ( )
→ Sensing settings window : [Operating mode]
Item Setting item Setting value Description
Operation mode Noise cut level 0 to 1500 [Gradation]
(default value :100)
Set the number of gradations when noise is cut from the
line bright.
1 Set [Noise cut level].
Noise Noise can be cut.