Omron ZW-7000 Series - Setting the Key Lock

Setting the System
ZW-7000/5000
User's Manual
243
Sensor controller operations
7
Setting the Key Lock
Setting the Key Lock p.163
Note that, moving to the key lock setting menu or moving between menu hierarchies are possible even when the key
lock function is ON.
Here is an explanation of the procedure for turning the key lock ON.
Operating procedure
Steps Key operation Display Description
1 Press and hold the key for two seconds to enter the FUNC
mode.
2 Press the / keys to select “SYSTEM” and press the
key.
3 Press the / keys to select “LOCK” and press the
key.
4 Select key lock ON/OFF.
The current setting value is displayed on the sub-display.
Press the / keys to enter the editing mode, and the sub-
display blinks.
In this example, select “ON” and press the
key.
5 Press the key for two seconds to enter the RUN mode.
Important