Specifications and External Dimensions
ZW-7000/5000
User's Manual
273
APPENDICES
9
l ZW-XF5002R/XF5005R/XF50010R/XF5020R/XF5030R
• Secure a minimum bending radius (R) for the fiber cable that is at least as large as the specification value.
A bending radius smaller than the specification value could cause da
mage to the fiber cable.
• When an extension fiber cable of 5 m or longer is connected, the setting rage of the
measurement cycle (exposure
time) changes. For details, refer to "Setting Measurement Cycle" in this manual.
Item Specifications
ZW-XF5002R ZW-XF5005R ZW-XF5010R ZW-XF5020R ZW-XF5030R
Applicable Sensor
Controller
ZW-5000
@
Applicable Sensor
Head
ZW-S50
@@
Ambient tempera-
ture
Operation: 0 to 50°C, Storage: -15 to +60°C
(with no icing or condensation)
Ambient humidity Operation, storage: 35 to 85%RH (with no icing or condensation)
Vibration resis-
tance
(destructive)
10 to 55 Hz (half amplitude 0.35 mm), 50 mins in each of X/Y/Z directions
Shock resistance
(destructive)
150 m/s
2
, 6 direction, 3 times each (up/down, left/right, forward/backward)
Fiber length 2m 5m 10m 20m 30m
Material Cable sheath: PVC, Connector: Bronze, Connecting adapter: Bronze
Fiber cable mini-
mum bending
radius
20mm
Weight Approx. 25g Approx. 35g Approx. 55g Approx. 100g Approx. 140g
Accessories Connection adapter (ZW-XFC2), 2Fiber cable protective cap, Instruction Sheet, Precautions
(Unit : mm)
* The following table lists cable lengths per models.
Type Specification L(mm)
2m
5m
2000+200/0
5000+200/0
10m
10000+200/0
20m
20000+500/0
30m
30000+500/0
XF5002R
XF5005R
XF5010R
XF5020R
XF5030R
(60) (57)(20)
L *
(57)
Fiber connector
Fiber connector
Fiber cable (3.0 Dia.)
Name plate
10 Dia.
Serial number label
(30)
10 Dia.
Connection adapter : ZW-XFC2
11.9 Dia.
15
1.35
+0.2
-0.5
Important
To Next Page
Loading...
