Setting the Output Conditions
ZW-7000/5000
User's Manual
135
4
Settings for Function
Performing Thickness Scaling
The thickness is measured at one position and offset values are set for that measured value.
Multi View Explore : [Bank] | [(Bank Data Name)] (double click)
→ Edit pane : [Task Settings] icon ( )
→ Task Settings window : [Scaling]
Item Setting item Setting value Description
Thickness scaling Setting value -999.999999 to 999.999999 [mm] Correct the measured value, and set the value to display.
1
Set the [Scaling] to OFF.
2
Click [Auto setting].
The [Scaling] popup menu appears.
3
Select [Thickness scaling], and click [Next
>].
The [Scaling] popup menu display changes to
[
Th
ickness settings].
4
Click [STOP] to fix the [Current value], set
[Set value] and click [Next >].
The [Scaling] popup menu display changes to
[
Conf
irm the scaling parameters], and the span
and offset values are displayed.
5
Click [OK].
Thickness scaling can also be executed by the operating keys on the Sensor Controller.
Performing Thickness Scaling p.224
The current measured value is displayed at
[Current value], and is refreshed at 100 ms
cycles. When [STOP] is clicked, refreshing of the
[Current value] display stops. Clicking the
[STOP] button again resumes display refreshing.
Note
To Next Page
Loading...
