Omron ZW-7000 Series - Displaying saved measured values

Saving measured values in a file
ZW-7000/5000
User's Manual
103
3
Basic Operation
 Multi view Explore : [(ZW model name)] (double click)
→ Edit pane : [Online] icon ( )
→ Online setting window : [Monitoring]-[Trend monitor
start]
1 Select [Trend Monitor].
The Trend Monitor window starts up.
2 Execute the sampling.
3 After sampling execution, click the export icon ( ).
4 Set the name of the export file.
The data is output in the following format.
TriggerEndValue2 -999.999999 to 999.999999 mm Indicates the judgment value for the trigger end condition.
For data window (in/out), indicates the upper limit.
TriggerEndDelay -999.999999 to 999.999999 mm Indicates the delay time for the trigger end condition.
DataPointsvalue 1 to 2147483647 Indicates the data number of Trigger end condition.
ExternalFileStorage Output destination of file. Indicates the save destination of file (absolute path).
MaxSamplesPerFile 1 to 999999999 Indicates the number of samples in one file.
TargetDirectory Indicates where the file is stored.
FilePrefix Indicates the prefix.
“2-1 Parallel I/O connection” described in Displacement Sensor ZW-7000 series Confocal Fiber Type
Displacement Sensor User’s Manual for Communications Settings (Z363)
LoggingMode Single
LoggingInterval 3600
TriggerStart Tr u e
TriggerStartType DataSlope
TriggerStartObject OUT1
TriggerStartConditions EqualTo
TriggerStartValue1 1.1
TriggerStartValue2
TriggerStartDelay 0
TriggerEnd Tr u e
TriggerEndType DataWindowIn
TriggerEndObject OUT1
TriggerEndConditions
TriggerEndValue1 -0.5
TriggerEndValue2 0.5
TriggerEndDelay 0
DataPointsValue 0
ExternalFileStorage FALSE
Item Output items Description
Note