2 ZX Series (ZX-L-N) Smart Sensors (Laser Type)
Accessories (Order Separately)
Calculating Unit
Side-view Attachments
Logging Tool for Personal Computers
Setup Tool for Personal Computer
*1. The ZX-SFW11EV3 or ZX-SW11EV3 is required to use the Smart Monitor
with the ZX-LDA11-N/41-N. Earlier versions cannot be used.
*2. The Smart Monitor Basic does not have a logging function. Other than the
logging function, the Smart Monitor Basic supports the same functions as
the Smart Monitor.
*3. It is prohibited to copy, to reproduce, and to distribute a part of or whole part
of this document without the permission of OMRON Corporation.
Cables with Connectors on Both Ends (for
Extension) *1
*1. Robot cable models are also available. The model numbers are ZX-XC@R.
*2. For use only with Reflective Sensors.
Bank Unit
Appearance Model
ZX-CAL2
Appearance Applicable
Sensor Head
Model Quantity
ZX-LT1001/
LT005
ZX-XF12 1
ZX-LT010 ZX-XF22
Appearance Name Model
Communications Interface
Unit (RS-232C)
ZX-SF11
Smart Monitor *3 (Logging
Software + Function Setting
Software)
ZX-SW11EV3 *1
Appearance Name Model
Communications Interface
Unit (RS-232C) + Smart
Monitor Basic *2 *3 (Function
Setting Software)
ZX-SFW11EV3 *1
Cable length Model Quantity
1 m ZX-XC1A 1M 1
4 m ZX-XC4A 4M
8 m ZX-XC8A 8M
9 m *2 ZX-XC9A 9M
Appearance Model
ZX-SB11
To Next Page
Loading...
