2
Component Descriptions
1. Blood Glucose Meter: Reads the test strips and displays the blood glucose
concentration.
2. Test Strips: Strips with a chemical reagent system used with the meter to
measure glucose concentration in blood.
3. Lancing Device: Used with sterile lancets to prick the fingertip, palm (at the
base of the thumb) or forearm for blood sample collection. The packaged
lancing device has multiple depth settings, allowing users to adjust the depth
of the puncture and minimize discomfort. It can also eject the used lancets.
4. Clear Cap: Used with the lancing device and sterile lancet to draw a blood
sample from the forearm or palm.
5. Sterile Lancets: Used with the lancing device to draw a blood sample. Sterile
lancets are inserted into the lancing device with each blood draw and
discarded after use.
6. Control Solution: Verifies the proper operation of the blood glucose monitoring
system by checking the test strips and meter against a pre-calibrated control
solution. Control Solution 1 is all you need most of the time. Control Solution 0
and Control Solution 2 are also available if you want to do a level 0 or level 2
test. The three levels of control solution, CTRL 0, CTRL 1 and CTRL 2 are
available in the On Call
®
Extra Glucose Control Solution package which is sold
separately.
7. Carrying Case: Provides portability for blood glucose testing wherever you go.
8. User's Manual: Provides detailed instructions on using the blood glucose
monitoring system.
9. Quick Reference Guide: Provides a brief overview of the blood glucose
monitoring system and testing procedures. This small guide can be kept in
your carrying case.
10. Warranty Card: Should be completed and returned to the distributor to qualify
for the 5-year meter warranty.
To Next Page
Loading...
Need help?
General