On Call Extra User Manual

4
Liquid Crystal Display (LCD): Shows your test results and helps you through the
testing process.
◄ Button: Recalls previous test results from the meter memory and performs
other menu selection functions.
► Button: Selects meter settings and performs other menu selection functions.
Strip Port: Test strips are inserted into this area to perform a test.
Strip Ejector: Slide the ejector forward to discard the used test strip.
Note: Dispose of blood samples and materials with care. Treat all blood samples
as if they are infectious materials. Follow your healthcare provider’s
recommendations for disposal.
Battery Cover: Remove the battery cover to install one CR 2032 coin cell battery.
Data Port: Sends information to a computer via an optional data transfer cable.
Allows you to view, analyze and print stored data in the meter. The data transfer
cable is available for order as an optional add-on.

On Call Extra Specifications

General

Sample Size	0.4 µL
Test Time	4 seconds
Blood Sample	Capillary whole blood
Battery	2 x AAA batteries
Display	LCD
Battery Life	Approximately 1, 000 tests
Automatic Power Off	2 minutes
Operating Humidity	10-90% RH
Measurement Range	20 - 600 mg/dL (1.1 - 33.3 mmol/L)
Memory	450 tests
Operating Temperature	5°C to 45°C (41°F to 113°F)