9.
After timing
#4
cylinder, adjust the valve clearance
6.
To
adjust the valve clearance of
#2
cylinder, tum
the flywheel
in
a clockwise direction 180 degrees
according to steps 3
and
4.
(one half revolution)
from
the position used
when
10.
To
adjust the valve clearance
for
#3
cylinder, turn the
timing
#1
cylinder. The flywheel position should
flywheel in a clockwise direction lBO-degrees (one-
be between 10 and
45
degrees past the
BC
(bottom
half revolution). The flywheel should be between
1()..
center) flywheel mark.
and 45-degrees past the
Be
(bottom center) flywheel
mark.
7.
After positioning #2 cylinder, adjust the valve cIea,:-
11.
After timing
#3
cylinder, adjust the valve clearance
ance according to
steps
3 and 4.
according to steps 3
and
4.
8.
To
adjust
#4
cylinder·
valve clearance, turn the
fly-
wheel in a clockwise direction 180-degrees (one-half
revolution). The flywheel should be between
10-
and
45-degrees past the
TC
(top center) flywheel mark.
i~
~
..
23
To Next Page
Loading...
Need help?
General
