Onan 200 DFP - Introduction; About this Manual; How to Obtain Service

Introduction
ABOUT THIS MANUAL
This manual provides general information for operating
and maintaining your Onan generator set. Study this
manual carefully and observe all warnings and cau¬
tions. Using the generator set properly and following a
regular maintenance schedule will result in longer unit
life, better performance, and safer operation.
Included with the generator set literature package is a
copy of the Cummins Manual for the engine. The engine
manual may be used in conjunction with the Generator
Set Operator’s Manual. The operation and maintenance
procedures for the complete generator set (including
the engine) are covered in the Generator Set Operator’s
Manual. In case of conflicting information, the Genera¬
tor Set Operator’s Manual takes precedence over the
engine manual.
HOW TO OBTAIN SERVICE
When the generator set requires servicing, contact an
Onan Distributor for assistance. Onan factory trained
Parts and Service representatives are ready to handle
all your service needs.
When contacting an Onan Distributor, always supply
the complete Model number and Serial number as
shown on the Onan nameplate (Figure 1). The Onan
nameplate is located on the side of the generator control
box.
l A m ps: _T 1_L
120/240 127/220 139/240 220/380 230/400 240/416
H For Elec
B Eqpt Only
I I . I II
Insul - NEMA Class Q Amb 40°C
Onan Corp
okiaim Minneapolis Mn
VIWI 55432 USA
Made m USA
FIGURE 1. ONAN NAMEPLATE
A WARNING |
INCORRECT SERVICE OR REPLACEMENT OF PARTS CAN RESULT IN SEVERE
PERSONAL INJURY AND EQUIPMENT DAMAGE. SERVICE PERSONNEL MUST
BE QUALIFIED TO PERFORM ELECTRICAL AND MECHANICAL SERVICE.
2