Need help?Do you have a question about the Onbon BX-Y04 and is the answer not in the manual?
Description of the BX-Y04 media player features and capabilities.
Procedure to add a new screen configuration to the software.
Method for configuring scanner parameters, including module selection and settings.
Automated process to detect and configure LED module scan settings.
Adjustments for display mode, brightness, gray scale, and refresh rate.
Fine-tuning scan parameters like wrap time and afterglow control.
Selecting specific driver chips for optimized module performance.
Procedure to set the server IP address and port for controller communication.
Configuring the system to use the iLEDCloud platform for remote screen management.
Process to create a new display program using the iLEDCloud platform.
Adding content areas like graphics, video, and text to a display program via iLEDCloud.
Modifying existing display programs, including adding subtitle zones.
Publishing created display programs to the LED screen via the cloud.
Adding various content areas like notice, video, or text to a program.
Adding image or text elements to a program, with options for positioning and size.
Completing the program creation process and saving the configuration.
Selecting and displaying a created program on the LED screen.
Configuring and displaying data from connected sensors like temperature and humidity.
Setting up temperature sensor display, including units and formatting.
Configuring humidity sensor display, including units and custom text options.
Adjusting screen brightness, including timing, manual, and automatic modes.
Description of the BX-Y04 media player features and capabilities.
Procedure to add a new screen configuration to the software.
Method for configuring scanner parameters, including module selection and settings.
Automated process to detect and configure LED module scan settings.
Adjustments for display mode, brightness, gray scale, and refresh rate.
Fine-tuning scan parameters like wrap time and afterglow control.
Selecting specific driver chips for optimized module performance.
Procedure to set the server IP address and port for controller communication.
Configuring the system to use the iLEDCloud platform for remote screen management.
Process to create a new display program using the iLEDCloud platform.
Adding content areas like graphics, video, and text to a display program via iLEDCloud.
Modifying existing display programs, including adding subtitle zones.
Publishing created display programs to the LED screen via the cloud.
Adding various content areas like notice, video, or text to a program.
Adding image or text elements to a program, with options for positioning and size.
Completing the program creation process and saving the configuration.
Selecting and displaying a created program on the LED screen.
Configuring and displaying data from connected sensors like temperature and humidity.
Setting up temperature sensor display, including units and formatting.
Configuring humidity sensor display, including units and custom text options.
Adjusting screen brightness, including timing, manual, and automatic modes.
General| Brand | Onbon |
|---|---|
| Model | BX-Y04 |
| Category | Media Player |
| Language | English |
To Next Page