Onbon OVP-M1X User Manual

www.onbonbx.com Page 10
Main Menu
Operations
Main menu includes one rotating button, one【OK】button, one【 】button and one
【GUIDE】button.
In initial status, short press【OK】as to enter into main menu.
In view status, if you rotate clockwise, it will move to upward or left; If you rotate
anticlockwise, it will move to downward or right. Move it to the function you want, and press
【OK】, it will enter into branch menu. Now, if you rotate anticlockwise, it will reduce present
value; If you rotate clockwise, will enlarge present value. Short click【OK】as to save values.
Click【GUIDE】as to get intelligent guide window.
Note: Rotate the button slowly and lightly.
Initial status of main window
When starting system, it will show starting window on LCD screen. After start, LCD
screen will show present status of machine, as below:
There are 3 areas:
 Input：
It shows selection info of input source, including input signal source format which is
detected by system;
 Output：
Shows real LED screen size which is set by users;
 Top right corner：
Shows present contrast, brightness values and button lock status.
Main menu
This equipment adopts 2.8”LCD screen (320*240), and adopts font 24*24 which can
display 10 rows. There are 6 parts on menu. If you are not in menu status, please click【OK】,

Onbon OVP-M1X Specifications

General

Brand	Onbon
Model	OVP-M1X
Category	Controller
Language	English