www.onbonbx.com Page 5
Brief Introduction
Safety Note
There’s high pressure components in this products, please do not open the box and
repair it by yourself.
Input voltage is 100-240V, 50/60Hz, please use correct power supply.
Power cable connect with GND. Please ensure that you will plug in the socket which is
connecting with GND before you connect with input and output port
Please take off the power supply of LED video processor before you do any hardware
operations, and ESD by touching the ground.
Please make sure that all the power supply cables and signal cables are plugged off
before you want to connect with plug off any signal cable and controlling cable.
Please make sure the environment is clean, dry and ventilated when you use this product,
also, do not put this product to a high temperature and wet environment.
This product is electronic products, please keep away from fire, water source and
flammable&combustible products.
Turn off the power supply immediately when you find smoking, peculiar smell or
something unusual. And contact with us soon.
About Software
Cannot do any modification, decompilation, disassembling, decoding or reverse
engineering on our software, it’s illegal.
To Next Page
Loading...
Need help?
General
