Onbon OVP-M1X User Manual

www.onbonbx.com Page 17
 Switch stunt：”switch seamless” and “fade over”
 Voice setting：Including switch button and volume setting.
6. Testing photo
There are 8 testing photos, photo 1-photo 8, default is “close”.
7. Button lock
Default is “close”, when “button lock” is in open status, all the buttons will be
useless except 【OK】.
8. Factory setup
Choose “FACTORY SETUP” in “OPTION”， as below:
 ADC correct：Usually, “VGA\CV correct” was done before selling in our factory.
 Language： ”Chinese”and “English”, default is Chinese.
 Factory reset：Reset to default value.
 Firmware version：Check present hardware version, factory date.

Onbon OVP-M1X Specifications

General

Brand	Onbon
Model	OVP-M1X
Category	Controller
Language	English