www.onbonbx.com Page 17
There are two settings:
Switch stunt：”switch seamless” and “fade over”
Voice setting：Including switch button and volume setting.
6. Testing photo
There are 8 testing photos, photo 1-photo 8, default is “close”.
7. Button lock
Default is “close”, when “button lock” is in open status, all the buttons will be
useless except 【OK】.
8. Factory setup
Choose “FACTORY SETUP” in “OPTION”， as below:
ADC correct：Usually, “VGA\CV correct” was done before selling in our factory.
Language： ”Chinese”and “English”, default is Chinese.
Factory reset：Reset to default value.
Firmware version：Check present hardware version, factory date.
To Next Page
Loading...
