One for All Universal remote User Manual

Volume Punch Through
You may be able to use some functions of your Television, Video recorder,
DVD player, Amp./Tuner, Satellite receiver or Cable converter at the same
time. For example: if you are watching a program on your video recorder,
you can adjust the volume (a TV function) without pressing the TV mode
key on your ONE FOR ALL 5.
To punch through to TV volume while in the VCR, DVD, AMP or
SAT mode:
1. Press and hold down the M (MAGIC) key until
the red LED underneath the POWER key blinks
twice (the red LED will blink once then twice).
2. Press 9 9 3.
3. Then press the TV key and the red light will
blink twice.
To cancel the “Volume Punch Through” per mode:
(Example: to cancel the “Volume Punch Through” for the VCR mode)
1. Press VCR once.
2 Press and hold down the M (MAGIC) key until
the red LED underneath the POWER key blinks
twice (the red LED will blink once then twice).
3. Press 9 9 3.
4. Then press the Volume (-) key and the red light
will blink four times.
Result: being in VCR mode, you will be able to control VOL+/- or MUTE
functions of your VCR (provided it has volume control).
To cancel the „Volume Punch Through“:
1 Press and hold down the M (MAGIC) key until
the red LED underneath the POWER key blinks
twice (the red LED will blink once then twice).
2. Press 9 9 3.
3. Press the Volume (+) key and the red light will
blink four times.
Extra Features
WWW.ONEFORALL.COM 11

One for All Universal remote Specifications

General

Brand	One for All
Model	Universal remote
Category	Universal Remote
Language	English