EasyManuals Logo

One for All Universal remote User Manual

One for All Universal remote
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Shifted Learning
You can also learn a function on a key of the ONE FOR ALL without
sacrificing the original ONE FOR ALL function. A Shifted Learning function
can also be put on any key EXCEPT for the following: Device keys, MAGIC
key, Number keys. To install a Shifted Learning function, simply follow steps
1-8 on the previous page. During step 5, press M (MAGIC) once before you
press the key where you are placing the learned function.
To access the shifted function, press M (MAGIC) and then the key you have
learned on.
To delete a learned function:
1 Press and hold down the M (MAGIC) key until the red LED underne-
ath the POWER key blinks twice (the red LED will blink once then
twice).
2 Press 9 7 6 (the red LED underneath the POWER key will blink twice).
3 Press the device key in which the function will be deleted.
4 Press twice on the learned key which will be deleted (the red LED
underneath the POWER key will blink twice).*
5 If there is another key which you wish to delete, repeat steps 1-4.
6 The original functions of the ONE FOR ALL 5 will now be present.
* To delete a Shifted Learned feature, press M (MAGIC) before you press
“the learned key to be deleted” (during step 4).
To delete all learned functions within
a specific mode:
1 Press and hold down the M (MAGIC) key until the red LED underne-
ath the POWER key blinks twice (the red LED will blink once then
twice).
2 Press 9 7 6 (the red LED will blink twice).
3 Press the appropriate device (mode).
Operational Reset
The Operational Reset will erase all learned functions across all modes and
some other programmed functions like Key Magic and Macros.
1 Press and hold down the M (MAGIC) key until the red LED
underneath the POWER key blinks twice (the red LED will blink once
then twice).
2 Press 9 8 0 (the red LED will blink four times).
WWW.ONEFORALL.COM 9

Other manuals for One for All Universal remote

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the One for All Universal remote and is the answer not in the manual?

One for All Universal remote Specifications

General IconGeneral
BrandOne for All
ModelUniversal remote
CategoryUniversal Remote
LanguageEnglish

Related product manuals