Key Magic
®
how to program missing functions
Key Magic is an exclusive ONE FOR ALL feature. The design of the ONE FOR
ALL ensures that many functions of your original remote control can be
operated - even those that do not have their own key on the ONE FOR ALL
keypad. Frequently used functions can be assigned to a key of your choice
using the Key Magic feature of your ONE FOR ALL.
In order to program a certain function with Key Magic you need to know
the corresponding function code. As these function codes vary with
different types of devices, they cannot be found in the manual. You can
request your function codes calling our consumer service or by sending us a
fax or e-mail.
Please mention:
• The 4-digit set-up code your device is working with.
• How the function was labelled on your original remote control.
Once you obtain(ed) your function code(s) from customer service,
programming the code is easy:
1 Press the device key (TV, VCR, SAT, DVD and AMP).
2 Press and hold down the M (MAGIC) key until the red LED
underneath the POWER key blinks twice (the red LED will blink
once then twice).
3 Press 9 9 4. The red LED underneath the POWER key will blink
twice.
4 Press the M (MAGIC) key once.
5 Enter the 5-digit function code (provided by customer service).
6 Press the key to which the function will be assigned. The device
key will blink twice.
EXTENDED FUNCTION REFERENCE
(first entry is an example):
DEVICE SET-UP CODE FUNCTION FUNCTION CODE
TV 0556 16/9 format 00234
- To access the function you have programmed, press the corresponding
device key first.
- Key Magic can be assigned to any key EXCEPT the Device keys and the M
(MAGIC) key.
- Please note all the extended function codes you obtain from customer
service for easy future reference.
Extra Features
14 WWW.ONEFORALL.COM
To Next Page
Loading...
Need help?
General
