12 WWW.ONEFORALL.COM
Volume Punch Through
If no volume-function is present on your device, you will obtain the volume of the device that
is programmed on the AUDIO key.
Volume Punch Through allows you to use the volume from another mode
without having to select this. E.g. controlling your TV volume while being in STB mode.
To punch through to TV volume while in the STB or AUDIO mode:
1. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED will
blink once and then twice).
2. Press 9 9 3. The red light will blink twice.
3. Then press the TV key and the red light will blink twice.
To cancel the “Volume Punch Through” per mode:
(Example: to cancel the “Volume Punch Through” for the STB mode)
1. Press STB once.
2. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED will
blink once and then twice).
3. Press 9 9 3. The red light will blink twice.
4. Then press the Volume (-) key and the red light will blink four times.
Result: being in STB mode, you will be able to control VOL+/- or MUTE
functions of your STB (provided it has volume control).
To cancel the „Volume Punch Through“ for all modes:
1. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice
(the LED will
blink once and then twice).
2. Press 9 9 3. The red light will blink twice.
3. Press the Volume (+) key and the red light will blink four times.
Result: all devices will operate their own volume-function again (provided it is present).
Extra Features
To Next Page
Loading...
