16 WWW.ONEFORALL.COM
Trouble-Shooting
Problem:
Your brand is not listed
in the code section?
The URC-9040 does
not operate your device(s)?
The URC-9040 is not
performing commands
properly?
PC related problems?
Problems changing
channels?
The URC-9040 does
not respond after
pressing a key?
The LED does not blink when
you press a key?
Solution:
Try the search method on page 8.
A) Try all the codes listed for your brand.
B) Try the search method on page 8.
You may be using the wrong code. Try repeating the Direct
Set-Up using another code listed under your brand or start
the search method over again to locate the proper code.
See the help file in OFA Media Centre, or for the latest FAQs,
check our website at www.oneforall.com”.
Enter the programme number exactly as you would on your
original remote.
Make sure you are using new batteries and are aiming
the URC-9040 at your device.
Replace batteries with 2 fresh, new “AAA/LR03” alkaline
batteries.
To Next Page
Loading...
