EasyManua.ls Logo

One for All URC-9040 - Page 6

One for All URC-9040
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 WWW.ONEFORALL.COM
8. Advance key
Press Advance to return to Advance/Quick Skip.
9. Guide
In TV and/or STB mode you will obtain the Guide function, if available on
your original remote. In AUDIO mode you will obtain the DSP mode function.
10. MENU Key
The MENU key controls the same function as it did on your original remote.
11. EXIT
In TV and/or STB mode you will obtain the Menu Exit function, if available
on your original remote.
12. Info
In TV and/or STB mode you may obtain the Display, OSD or Info func-
tion, if available on your original remote.
13. Directional Keys
If available on your original remote, these keys will allow you to navigate
through the menu mode of your device.
14. OK
The OK key will confirm your choice in menu operation and programming
mode.
15. Volume +/- Keys
These keys operate in the same way as the keys on your original remote. If no
volume-function is present on your device, you will obtain the volume of the
device that is programmed on the AUDIO key.
16. Channel +/- Keys
These keys operate in the same way as the keys on your original remote. In PC
mode they will allow you to skip up or down through pages.
17. MUTE Key
The Mute key operates the same function it did on your original remote con-
trol. If no mute-function is present on your device, you will obtain the mute-
function of the device that is programmed on the AUDIO key.
18. LAST Key
This key will provide you the LAST (or Recall or Previous Program) function (if
available on your original remote).
The Keypad

Table of Contents

Related product manuals