NOTE: The DVR must be restarted after changing network settings before they take affect.
Press [STOP ] to delete a number
Press [REC ] to insert a number
Press [MENU] to save and return to previous menu.
Press [REC ] to insert a number
Press [MENU] to save and return to previous menu.
SUBNET MASK: Subnet Mask is used to determine
what subnet an IP address belongs to.
Press [REW FWD ] buttons to move the cursor
to the number to be changed,
Press [▲, ▼] buttons to select the number you want
to change to.
Press [SEL] to make the change
Press [STOP ] to delete a number
Press [REC ] to insert a number
Press [MENU] to save and return to previous menu.
IP ALLOCATION: DVR supports DHCP and
Static IP modes. If your modem/router supports
DHCP mode use DHCP.
When using STATIC mode, you will be required
to setup your internet settings manually.
After setting the DVR to DHCP mode restart the unit
for your settings to take effect.
IP Address: In a local network, the IP address is
a unique designated address for your DVR. Ensure
this number is within the range usable by your
network.
Press [REW FWD ] buttons to move the
cursor to the number to be changed,
Press [▲, ▼] buttons to select the number you
want to change to.
Press [SEL] to make the change
GATEWAY: Set this number to the gateway set
by your modem/router.
Press [REW FWD ] buttons to move the
cursor to the number to be changed, Press [▲, ▼]
buttons to select the number you want to change to.
Press [SEL] to make the change
Press [STOP ] to delete a number
To Next Page
Loading...
General