1. Guideline
The purpose of this document is only to guide OnePlus technicians to carry out maintenance service to
OnePlus products. The content shall be keep in confidential, only avail be able to OnePlus authorized
service centers, and cannot be provided to third parties without authorization. Please follow the
regulations and the guidance for maintenance service.
1.1 Warnings
1. The service center may be required to install the mobile phone in-vehicle system in the car if
necessary. In the case of some failures, the radio frequency signal of the mobile phone may affect
the car's power management system and ABS (ANTI-SKID BRAKING SYSTEM) anti-lock braking
system. If necessary, please consult the car dealer or manufacturer to determine the anti-
interference performance of the car electronic system to radio frequency energy.
2. Mobile phones cannot be operated in the following places: places with potential explosions, such as:
gas stations, gas stations, blasting work areas, etc.
3. Any wireless transceiver equipment, including cell phones, may interfere with medical equipment
protected by industrial establishments. If necessary, please communicate with the medical
equipment manufacturer, other electronic equipment may also be interfered.
1.2 Cautions
1. Repair services and calibrations must be undertaken by qualified personnel only.
2. Ensure all components, modules screws and insulators are correctly re-fitted after servicing and
alignment.
3. Electrostatic discharge is the main cause of damage to sensitive components of electronic products.
Service centers must operate in accordance with OnePlus's requirements for ESD protection. Ensure
all work is carried out at an ESD workstation and that an ESD wristband is worn.
To Next Page
Loading...
