Onkyo A-8017 - Specifications

A 8017
SPECIFICATIONS
- 2x 180 watts at 4 ohms,
1kHz (DIN)
2 x 110 watts at 8 ohms,
1kHz (DIN)
2x 115 watts at 4 ohms,
1kHz (DIN)
2 x 85 watts at 8 ohms,
1kHz (DIN)
80 watts per channel min. RMS
at 8 ohms both channels
driven, from 20Hz to 20kHz,
with no move than 0.015%
THD.
0.015% at rated power
0.005% at rated power
50 at 8 ohms
2 — 50,000 Hz +1 dB
20 — 20,000 Hz +0.3 dB
Phono (MM): 2.5mV/50 kohms
Phono (MC): 280uV/330 ohms
Tuner: 150 mV/50 kohms
Tape Play: 150 mV/50 kohms
Tape Rec: 150 mV/3.3 kohms
Music Power Output:
Continuous Power Output:
Total Harmonic Distortion:
IM Distortion:
Damping Factor:
Frequency Response:
RIAA Deviation (MM):
Sensitivity and Impedance:
(phono)
Phono Overload: 210 mV RMS at | kHz,
0.015% THD
Bass Control: +8 dB at 70 Hz
Treble Control: +8 dB at 20,000 Hz
PHONO
SEL.
INPUT
SEL.
1¢ EQUALIZER AMP. SEL. LAMP
C 2 oe, —~— DRIVE
ror! O- QS Ss
2 > ae se | 2
< &
CARTRIOGE< a
SEL. Sa
REC. LAMP DRIVE
REC. SEL.
ri
ae |
PLAY €
TAPE-!
REC. ©
PLAY ©
TAPE -2
REC. €
a
Signal to Noise Ratio: Phono (MM):
80 dB (IHF A-202, 5 mV
input, | watt output)
Phono (MC):
68 dB (IHF A-202, 0.5 mV
input, 1 watt output)
Tuner & Tape:
84 dB (IHF A-202, 0.5V
input, 1 watt output)
Muting: —20 dB
Loudness Control: +6 dB at 70 Hz, +5 dB at
20 kHz
Subsonic Filter: 15 Hz (6 dB/Oct.)
High Cut (TREBLE MIN): 6 kHz (6 dB/Oct.)
General
Semiconductors: IC: 3 TR: 51 Diode: 26
Dimensions: 435(W) x 142(H) x 392(D)mm
17-1/8"x5-9/16"x15-7/16"
Weight: 11.5 kg (25.4 lbs.)
Specifications and features are subject to change without
notice.
MODE MUTING SUBSONIC BASS
oy, oo, \7
QTR RG
VOLUME
{»
Vv
LOUDNESS
SPEAKER LAMP
ORI VE SPEAKERS
EOWERONE
SPEAKER—A
SP EAKER-B
PHONES
PROTECTION Pe
CIRCUIT SERVO LAMP