Onkyo BD-SP807

40
FUNCTION SETUP
EN
*) Settings with (*) are the default.
*1)
Do not set “HDMI Video Resolution” to “Source Direct” or “1080p24” if the connected display device does not support
the video resolution of 1080p24. If “HDMI Video Resolution” is set to “Source Direct”, it may take a while to display the
playback picture, when the video resolution of a disc material switches during playback.
The table below describes the available output resolution when “HDMI Video Resolution” is set to “Source Direct”.
Setting items Options
HDMI Deep Color
Sets whether to output the picture
from HDMI OUT jack with Deep Color
or not.
Auto*:
The picture from HDMI OUT jack will be output with Deep Color to the
connected TV which supports HDMI Deep Color.
Off:
The picture from HDMI OUT jack will be output without Deep Color.
Component Output
Sets the video resolution for
component output.
480i/576i*
480p/576p
720p
1080i
Progressive Mode
*2
Sets the optimum progressive mode
for the image material output from
HDMI OUT jack and VIDEO OUTPUT
(COMPONENT) jacks.
Depending on the video material,
image quality may get degraded due
to the wrong Progressive Mode
setting. In such case, change the
setting.
Auto1*:
The progressive mode will be selected automatically depending on the material
type (film or video).
Auto2:
Suited for 25-frame(PAL) or 30-frame(NTSC) progressive video material such as
flash animation created on PC.
Video:
Suited for 50-frame(PAL) or 60-frame(NTSC) video material such as TV dramas or
TV animations.
Still Mode
*3
Adjusts picture resolution and quality
in still mode.
Auto*:
Automatically selects the best resolution setting (“Frame” or “Field”) based on
the data characteristics of the pictures.
Field:
Stabilises the pictures, although the picture quality may become coarse due to
the limited amount of data. Select “Field” when the pictures are still unstable
even if “Auto” is selected.
Frame:
Displays relatively motionless pictures in higher resolution. “Frame” improves
the picture quality, although it may unstabilise the pictures due to alternate
output of 2-field data.
TV Active Area
Sets the horizontal display area for
interlace (480i) output.
Normal:
Select this if the image is not stable with connecting to professional-use display.
Full*:
Select this for connecting to commonly-marketed display.
FUN
Output resolution
Media 480i/576i 480p/576p 720p 1080i 1080p 1080p24
BD-video cccccc
AVCHD ccccc ]
DVD-video c ]]]]]
DivX
®
cccc ]]
JPEG ]]]]c ]
c : available ] : not exist