Onkyo BD-SP807

44
FUNCTION SETUP
EN
How to navigate through “HDMI Multi(LPCM)” and “Multi Channel” setting.
1 Use [K / L] to select your desired menu item then press [ENTER].
2 Use [K / L] to select your setting items.
•Press [RETURN] to go back to the previous screen.
3 Use [s / B] to select desired options. (Except for “Test Tone”, “Default” and setting
options in “Speaker Size” setting.)
For setting options in “Speaker Size” setting:
Press [ENTER] to select desired options.
For “Test Tone”:
Use [s / B] to select “Off”, “Manual” or “Auto”, then press [ENTER].
• The test tone will be output. If you select “Manual”, use [K / L] to select desired speaker, then use [s / B] to adjust
the volume. If you select “Auto”, use [s / B] to adjust the volume of the speaker that outputs the test tone.
• If you want to stop the test tone, press [RETURN].
For “Default”:
Press [ENTER] to reset to the default.
4 Press [SETUP] to exit.
Menu Setting items Options Descriptions
Speaker Size
Selects the desired
speaker to set. Then
change the setting
appropriately by
referring to the
descriptions.
Front Large* Large:
For the large speakers with strong low
frequency reproduction capabilities.
Small:
For the small speakers which do not provide
strong bass sound.
None:
No speakers. For “Subwoofer” there is only
“On” or “None”.
You cannot change the setting of
“Subwoofer”. If connected device is not
compatible with subwoofer, “Subwoofer” will
be displayed in gray.
Small
Center Large*
Small/None
Subwoofer On*/None
Surround Large*
Small/None
Surround Back Large*
Small/None
Default Select “Default”, then press [ENTER] to reset
“Speaker Size” setting to the default.
Channel Level
Tests or sets the
volume for each
speaker.
Test Tone:
“Test Tone” is the test
tone which can be
output from the
speakers so that you
can adjust the volume
for each speaker.
Off* Select “Off” to deactivate “Test Tone”.
Select “Manual”, then press [ENTER] to
manually set the volume for the desired
speaker.
Select “Auto”, then press [ENTER] to
automatically output the test tone from each
speaker.
Manual
Auto
Front Lch 0dB to -12dB
(0dB*)
If you have selected “Manual” in “Test Tone”,
select the desired speaker to set and adjust
the volume for the selected speaker.
If you select “Auto” in “Test Tone”, test tone
will automatically be output in order. Adjust
the volume of the speaker that outputs the
test tone.
Center 0dB to -12dB
(0dB*)
Subwoofer 0dB to -12dB
(0dB*)
Front Rch 0dB to -12dB
(0dB*)
Surround Rch 0dB to -12dB
(0dB*)
Surround Back Rch 0dB to -12dB
(0dB*)
Surround Back Lch 0dB to -12dB
(0dB*)
Surround Lch 0dB to -12dB
(0dB*)
Default Select “Default”, then press [ENTER] to reset
“Channel Level” setting to the default.
A
C