Onkyo BD-SP807

45
FUNCTION SETUP
EN
*) Settings with (*) are the default.
• For HDMI, “None” option for “Speaker Size” is not available.
• For “Delay Time”, the difference between the value of the “Front”, “Surround” and “Surround Back” setting cannot
exceed 4.5m (15 ft), and the difference between the value of the “Front” and “Center” setting cannot exceed 1.5m
(5 ft).
• For “Delay Time”, the value of the “Center”, “Surround” and “Surround Back” setting cannot exceed the value of the
“Front” setting.
• For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically corresponding to each
setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround” and “Surround Back” to “Large”.)
• If you connect to 5.1-channel surround system, set “Surround Back” in “Speaker Size” to “None”.
• For “Delay Time”, the setting of “Center”, “Surround” and “Surround Back” will be changed automatically to the setting
value of the “Front”. (e.g. If the “Front” is set to 18m (60ft), the setting of “Center”, “Surround” and “Surround Back” will
be changed to 18m (60ft) as well.)
• If you want to stop the test tone, press [RETURN].
Menu Setting items Options Descriptions
Delay Time
This is a parameter for
optimising the timing
at which the sound is
output from the
speakers according to
their distance from the
listening position.
Distance Feet Set the desired measure system. This measure
system will be used for “Delay Time” setting.
Press [ENTER] (or [s / B]) to switch the
settings.
Meters*
Front 0m to 18m (3.6m*)
(0ft to 60ft (12ft*))
Select the distance from the listening position
to the speaker to get the ideal delay time.
Center 0m to 18m (3.6m*)
(0ft to 60ft (12ft*))
Surround 0m to 18m (3.0m*)
(0ft to 60ft (10ft*))
Surround Back 0m to 18m (3.0m*)
(0ft to 60ft (10ft*))
Default Select “Default”, then press [ENTER] to reset
“Delay Time” setting to the default.