Onkyo C-755 - RI Connections

En- 14
Connecting the CD Player-Continued
With (Remote Interactive) you can control the
C-755 together with your other
-compatible
Onkyo AV components. With some Onkyo AV
receivers you can use one remote controller to con-
trol all your Onkyo components and use the follow-
ing special
functions:
Direct Change
If your C-755 is connected to an -compatible
Onkyo hi-fi amp or AV receiver, when you start play-
back on the C-755, the AV receiver will select the
C-755 as the input source.
Remote Control Operation
You can control the C-755 by using your Onkyo
amplifier’s remote controller. See the amplifier’s
instruction manual for details.
To use the functions, you need to connect one of
the C-755’s
connectors to an connector on
another AV component in your system by using the
supplied
cable.
See the manuals supplied with your other -com-
patible AV components for more information.
Notes:
• Use only cables for connections.
• The C-755 has two
connectors. You can con-
nect either one to your Onkyo hi-fi amp or AV
receiver. The other connector is for connecting
additional
-compatible components.
• Connect the C-755’s
connector only to Onkyo
AV components. Connecting to other manufac-
turer’s AV components may cause them to mal-
function.
• Some Onkyo -compatible AV components
may not support the special functions described
here.
Connections
LR
RCA/phono audio cable (not supplied)
cable (supplied)
Coaxial cable (supplied)
Onkyo Hi-fi amp, AV receiver
Disconnect the power
cord before making any
connections!
Coaxial IN
CD
To use you must make an analog audio connection
(RCA/phono) between the C-755 and your other Onkyo
component even if they are connected digitally.
SN29402439_C-755_En.book 14 ページ ２０１６年８月９日 火曜日 午後２時１４分