To Next PageTo Next Page
Need help?Do you have a question about the Onkyo CP-1050 and is the answer not in the manual?
General| Type | Direct drive audio turntable |
|---|---|
| Product color | Black |
| Nominal speeds | 45, 33 1/3 RPM |
| Signal-to-Noise Ratio (SNR) | 60 dB |
| Built-in display | No |
| Line outputs (RCA) | 2 |
| USB ports quantity | 0 |
| Power supply type | AC |
| AC adapter frequency | 50/60 Hz |
| AC adapter input voltage | 220 - 240 V |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 6 W |
Weight and Dimensions| Weight | 8600 g |
|---|---|
| Platter diameter | 305 mm |
| Product dimensions (WxHxD) | 450 x 367.5 x 158 mm |
Guidance on copyright law for personal use and illegal recording.
Information regarding the non-user-serviceable AC fuse within the unit.
Instructions for cleaning the unit using soft cloths and mild detergent.
Important warnings and instructions regarding AC power connection and plug accessibility.
Cautionary note about potential hearing loss from excessive sound pressure.
Warning against exposing batteries to excessive heat or fire.
Safety warning against handling the unit or power cord with wet hands.
General notes for transporting, using, and storing the unit.
Guidelines for proper placement, ventilation, and environmental considerations for installation.
Explanation of potential damage from moisture condensation and how to prevent it.
Information on FCC, European, and Canadian compliance standards and regulations.
Instructions for handling and replacing AC plugs and fuses, especially for British models.
Instructions for inserting the turntable onto the center spindle and placing the rubber mat.
Steps to fit the head shell into the tone arm and tighten the locking nut.
Guidance on mounting the counterweight onto the tone arm shaft.
Advice on installing the unit on a horizontal surface, away from heat and interference sources.
How to adjust the unit horizontally by setting the height of the insulators.
Procedure to adjust the tone arm for horizontal balance, ensuring proper stylus pressure.
Steps to set the correct stylus pressure for optimal playback and stylus life.
How to set the anti-skating value to match the stylus pressure for balanced playback.
Instructions for connecting the unit to an amplifier using pin cables and grounding.
Guidance on connecting the power cord to the unit and the AC outlet.
Steps for attaching the dust cover hinges and the cover itself.
Preparation steps before playing a record, including releasing the arm clamp and setting volume.
Detailed steps for placing a record, setting speed, and starting the turntable.
Instructions on how to stop playback, including arm rest and power off procedures.
Explanation of the auto-standby feature for European models and how to exit it.
Basic troubleshooting steps like power cycling and cord checks.
Steps to resolve issues where the unit does not power on.
Solutions for when the stylus does not lower onto the record.
Troubleshooting for lack of sound or very low volume output.
Causes and solutions for unwanted humming or buzzing noises during playback.
Tips to prevent the stylus from jumping due to vibration or improper setup.
Troubleshooting steps for when the speed selector button indicator blinks.
Instructions for gently handling and cleaning the delicate stylus tip.
Information on stylus lifespan and how to replace it with a specific model (DN-105ST).
Advice on using record cleaners to maintain record quality and protect the stylus.
Steps for safely packing and transporting the turntable unit.
Technical details of the turntable, including drive method, speed, and wow/flutter.
Specifications for the tone arm, such as effective length, overhang, and tracking error.
Details of the cartridge (OC-105), including type, load resistance, and output voltage.
Overall specifications including power supply, consumption, dimensions, and weight.
