Onkyo CP-1050

14
Specifications
∫ Turntable section
∫ Tone arm section
∫ Cartridge section (OC-105)
∫ General
Specifications and features are subject to change without
notice.
Drive method
: Direct drive
Turning speed: 33 1/3 rpm, 45 rpm
Wow and flutter: 0.15 % or less
Signal to noise ratio: 60 dB or above
Turntable: Aluminum die-cast
Diameter 305 mm
Motor: Brushless DC motor
Starting torque: 1.0 kgf-cm or above
Type: Static balance, S-shaped tone arm
Effective length: 230 mm
Overhang: 15 mm
Tracking error angle: Within 3
o
Stylus pressure adjustment range: 0 g to 4 g
Applicable cartridge weight range
(including a head shell): 15 g to 20 g
Type: MM
Load resistance: 47 k
h
Output voltage: 2.5 mV d 3dB
Stylus pressure: 3.5 g
d 0.5 g
Replacement stylus: DN-105ST
Cartridge weight: 5 g
Head shell weight: 10 g
Power supply: (North American) AC 120 V, 60 Hz
(European) AC 220 - 240 V, 50/60 Hz
Power consumption: (North American) 4 W
(European) 6 W
Standby power consumption: (European) 0.4 W
Dimensions (W × H × D): 450 mm
k 158 mm k 367.5 mm
(17-11/16"
k 6-1/4" k 14-7/16")
Weight: 8.6 kg (19.0 lbs.)
CP‑1050eng.book14ページ２０１４年１１月１７日 月曜日 午後２時２９分