To Next PageTo Next PageWhy is there no sound coming from my Onkyo CR-505DAB speakers?
Several factors could be at play. First, ensure the speaker cables are properly connected, and no wires are touching each other or any metal parts. Check that the volume isn't set to minimum and that the receiver isn't muted. If headphones are connected, disconnect them. Verify the correct input source is selected. Finally, inspect connecting cables for damage and replace if needed.
Why doesn't my Onkyo CR-505DAB Car Receiver turn on?
Make sure the power cord is properly connected to a suitable wall outlet.
Power Output| power output (DIN) | 20 W + 20 W (4 Ω, 1 kHz) |
|---|---|
| power output (JEITA) | 25 W + 25 W (4 Ω, 1 kHz) |
| dynamic power | 30 W + 30 W (4 Ω) |
Total Harmonic Distortion| THD (AMP) | 0.2% (5 W Output, 4 Ω) |
|---|---|
| THD (FM Stereo) | 0.46% (1 kHz) |
| THD (FM Mono) | 0.4% (1 kHz) |
| THD (AM) | 1.60% |
| THD (DAB) | 0.20% |
| THD (CD) | 0.01% |
Frequency Response| frequency response (AMP) | 10 Hz-50 kHz/+3 dB, –3 dB (LINE) |
|---|---|
| frequency response (FM) | 30 Hz-15 kHz/+1.5 dB, –1.5 dB |
| frequency response (DAB) | 20 Hz-20 kHz |
| frequency response (CD) | 20 Hz-20 kHz |
General Specifications| power supply | AC 230-240 V, 50 Hz |
|---|---|
| power consumption | 75 W |
| stand-by power consumption | 1.0 W |
| dimensions (W x H x D) | 205 W x 103 H x 356 D mm |
| weight | 5.3 kg |
Guide on how to connect speaker wires to the CR-505DAB for audio output.
Instructions for connecting the supplied FM, AM, and DAB antennas.
How to connect external audio sources like tape decks or MD recorders.
Steps to power on the unit and set the internal clock.
Detailed steps for manual clock setting if automatic fails.
Instructions on how to play audio CDs and MP3 discs.
Step-by-step instructions for configuring the timer functions.
A guide to diagnosing and resolving common issues with the CR-505DAB.
Technical details and performance metrics of the CR-505DAB.
