Onkyo CR-N7 User Manual

27
Playing a CD—Continued
Selecting MP3 Tracks in All Group Mode
With All Group mode you don’t have to navigate the
group hierarchy to find an MP3 track because all groups
that contain MP3 tracks appear at the same level.
If in Random mode, press YES/MODE to switch to Nor-
mal mode.
If you want to operate the control during playback, press
GROUP and select a group by using MULTI JOG, and
then press it.
Playback is switched to the group, now you can select
any track by using MULTI JOG.
■ Pausing the Selected Track
To pause the selected track, press .
To resume playback, press .
■ Cancelling Navigation or All Group mode
To cancel Navigation mode or All Group mode while
selecting MP3 tracks, press .
■ Selecting MP3 Groups & Tracks by Number
1 Press GROUP to enter the All Group mode.
2 Press the number buttons as described in the
examples below to play back the desired group.
The group with the specified number starts playback.
If you have operated the above mentioned control
during playback, press ENTER.
3 Press the number buttons to enter the track
number.
Playback starts automatically.
If the group contains 100 or more tracks, single- and
double-digit track numbers must be preceded with
zeros. For example, to enter track number 32, press
0, 3, and then 2.
1
While playback is stopped, press
GROUP.
The CD receiver enters All Group
mode and the name of the first group
appears on the display.
2
Use MULTI JOG to select a group.
You can select any of the groups on the
disc that contain MP3 tracks.
To play the first track of the selected
group, go to Step 4.
3
To access the tracks inside the
group, press GROUP.
The name of the first track inside the
group appears on the display.
Use MULTI JOG to select the tracks in
that group.
To select another group, press GROUP
again, and then turn MULTI JOG.
4
Press MULTI JOG or press .
Playback starts.
2-4
1, 3
NAME
GROUP
C D
MP3
GROUP
NAME
GROUP
TRACK
TRACK
C D
MP3
/
/
/
The group to play Press
8
represents the tens digit.
10
34
1, 3
2, 3
4
Using the remote controller
Number buttons

Onkyo CR-N7 Specifications

Power

power supply	AC 230–240 V, 50 Hz
power consumption	68 W
stand-by power consumption	0.3 W

Audio Inputs and Outputs

analog inputs	LINE, TAPE, HDD
digital outputs	Optical: 1
analog outputs	TAPE, HDD

Amplifier Specifications

power output	14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power	26 W + 26 W (4 Ω, JEITA)
damping factor	25 (8 Ω)

Tuner Specifications

fm tuning frequency range	87.5 MHz–108 MHz
am tuning frequency range	522 kHz–1611 kHz
stereo separation	40 dB (1 kHz)

CD Specifications

frequency response	10 Hz–20 kHz
audio dynamic range	92 dB
thd (total harmonic distortion)	0.009 %

Weight and Dimensions

dimensions	205 W x 147 H x 356 D mm
weight	4.3 kg