22 EN
BASIC PLAYBACK
Playing Back a BD, DVD or a Disc with AVCHD files
BD-V
DVD-V
AVCHD
1
Press [ON/STANDBY I /Q].
2
Turn on the TV and select the
appropriate input on the TV to
which the unit is connected.
3
Press [OPEN/CLOSE A] to open the
disc tray.
4
Place the disc on the disc tray with
its label side facing up.
5
Press [OPEN/CLOSE A] to close the
disc tray.
It may take a while to load the disc.
Some discs may start playback automatically.
6
Press [PLAY B] to start playback.
For many of BD-video and DVD-video, a menu
screen may appear.
In this case, use [K / L / s / B] to select the
desired item, then press [ENTER].
7
Press [STOP C] once to stop
playback temporarily.
Refer to “Resume Playback” on page 23.
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray,
then remove the disc before turning off the
unit.
Note
• may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
• During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• BD/DVD/AVCHD/menu varies depending on discs.
Align the disc to the
disc tray guide.
E5L50ED_EN.book Page 22 Wednesday, June 10, 2009 1:02 PM
To Next Page
Loading...
