Onkyo DV-BD507

30
SPECIAL PLAYBACK
EN
• The programmed tracks / files is displayed in the right
hand screen.
•Use [s / B] to go back forward between the
hierarchy of folders.
3 Press [PLAY B] to start programme playback.
• Programme playback will start.
To exit from the programme playback mode:
•Press [RETURN] in stop mode.
This function shuffles the playback order of tracks / files.
1 In stop mode, press [MODE] twice.
• The random screen will appear.
2 Press [PLAY B] to start random playback.
To exit from the random playback mode:
•Press [MODE] in stop mode.
Note
• During programme playback, press [STOP C] once
to set the resume point, and then press [PLAY B] to
resume programme playback from where [STOP C]
was pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (MP3 or JPEG).
• During programme playback, press [STOP C]. To go
back to the normal programme playback, press
[RETURN] to exit from the programme screen, then
press [PLAY B].
• The programme will be cleared when:
- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for “Disc” mode, just
opening the disc tray will clear the programme
info.)
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the programme,
press [REPEAT] repeatedly until “ Track”
appears during playback. To repeat the entire
programme, press [REPEAT] repeatedly until
“ All” appears during playback.
• Even if an inserted disc contains mixed MP3 and
JPEG files, programme function allows 99 files in
combination of MP3 and JPEG files.
• Playback from a desired track / file and random
playback are not available during programme
playback.
•Press [MODE] to switch to the random playback
mode.
Random Playback
Track / File information
audio CD : “CD-DA” will be displayed.
MP3/JPEG : Current disc, SD Memory Card, or
folder name will be displayed.
Track / File
list
: Track / File list in the original order
Operation
Guide
: Press [A] to go to the previous page
in the track / file list.
Press [B] to go to the next page in
the track / file list.
Total playback time of all tracks
Playback status
Note
• During the random playback, press [STOP C] once to
set the resume point, and then press [PLAY B] to
resume random playback from where [STOP C] was
pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (MP3 or JPEG).
• During random playback, press [STOP C]. To cancel
the random playback, press [MODE] when the
random playback screen is displayed.
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
“ Track” appears during playback. To repeat the
entire random selection press [REPEAT] repeatedly
until “ All” appears during playback.
• For a disc containing mixed MP3 and JPEG files,
random playback of those files will be performed.
• You cannot go back to the previous track / file during
random playback.
CD
JPEG
MP3
e.g.) audio CD
1 : 13 : 29
1 0:36
1:14
0:45
0:50
0:53
0:20
0:54
2
3
4
5
6
7
- - / 16
1 62 3 4 5
Random
Tot al
CD_DA
Page Down
1
2
3
4
5
6
E5L50ED_EN.book Page 30 Wednesday, June 10, 2009 1:02 PM