29
SPECIAL PLAYBACK
EN
You can play back the specific part (between point A and
point B) repeatedly.
1 During playback, press [A-B] at the desired
starting point A.
2 During playback, press [A-B] at the desired
ending point B.
As soon as you set the point B, the part between point
A and point B will start playback repeatedly.
• To cancel the A-B repeat, press [A-B] again.
Some BD-video have the PIP (picture-in-picture) function
which enables you to display the secondary video in the
primary video. You can call up the secondary video by
pressing [PIP] whenever the scene contains the secondary
video.
1 During playback, press [PIP].
PIP information will appear.
2 Use [K / L] to select the secondary video you
want.
• The secondary video will be displayed and the
secondary audio will be output.
3 Press [RETURN] or [PIP] to remove the PIP
information.
You can play back the disc in your desired order.
1 In stop mode, press [MODE].
• The programme screen will appear.
2 Use [K / L] to select a track / file, then press
[ENTER].
• For MP3 and JPEG files, use [K / L] to select a folder,
then press [ENTER] first, and then use [K / L] to
select a file, then press [ENTER].
•Press [CLEAR] to erase the last file of the programme.
•Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the programme.
A-B Repeat
Note
• Point B should be set within the same title or track as
point A.
• A-B repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B repeat does not function during chapter, title,
track, group or all repeat playback.
•For some DivX
®
files, A-B Repeat playback may not
function.
PIP (Picture in Picture) (BONUSVIEW)
Setting
BD-V
DVD-V
AVCHD
CD
DivX
BD-V
primary
video
secondary
video
Note
• [MODE] can also be used instead of [PIP].
• The secondary audio will not be output when the
secondary audio is set to “Off” or when “BD Audio
Mode” is set to “HDMI Audio Out”. Refer to
“Switching Audio Soundtrack” on page 33 and
“Setting the BD Audio Mode” on page 34.
Programme Playback
Track / File information
audio CD : “CD-DA” will be displayed.
MP3/JPEG : Current disc, SD Memory Card, or
folder name will be displayed.
Track / File
list
: Track / File list in the original order
Programmed
list
: Track / File list in the programmed
order
Cumulative playback time of all tracks in the
programmed list
Playback status
Current page / Total page number
Operation
Guide
: Press [A] to go to the previous page
in the track / file list.
Press [B] to go to the next page in
the track / file list.
Press [C] to go to the previous page
in the programmed list.
Press [D] to go to the next page in
the programmed list.
CD
MP3
JPEG
e.g.) audio CD
0 : 26 : 24
0:36
1:14
0:45
0:50
0:53
0:20
0:54
8
9
10
11
12
13
14
1:14
0:50
1:14
0:50
0:53
0:54
0:36
2
4
9
11
12
14
8
- - / 16
1 62 3 4
7
5
8
Program
Total
CD_DA
Page Up Page Down Page Prev Page Next
1
2
3
4
5
6
7
8
E5L50ED_EN.book Page 29 Wednesday, June 10, 2009 1:02 PM
To Next Page
Loading...
