DV-SP500
UPGRADE FIRMWARE-4
Confirm of the FW
1. Press the SETUP key
2. Operate the CURSOR switch to make up the Setup menu mode are selected on monitor TV.
3. Press the DISPLAY button
The region and FW version information will appear on the monitor TV.
7. Setting the Region code.
* MDD1N and MJJ2N are automatically chosen. (Automatically witting)
Destination RC-449DV (Slide SW: TV position) Transmission Code Region
MDD1N * * 1
MJJ2N * * 2
MUP2P 2 D22F 12
2
MUT3P 3 D22F 13 3
MUS4P 4 D22F 14 4
MUR6R 6 D22F 16 6
*
: automatically chosen
When display the TV monitor is "RIGIN INI", key input the rigoinal code by remote controller.
To Next Page
Loading...
