57
Using the Listening Modes
See “About the Listening Modes” on page 59 for
detailed information about the listening modes.
Selecting on the AV Receiver
■ [PURE AUDIO] button (not North American
models)
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver’s dis-
play is turned off and only video signals input
through HDMI IN can be output. Pressing this but-
ton again will select the previous listening mode.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [ ] [ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Selecting with the Remote Controller
■ [SURROUND] button
This button selects the Dolby Digital and DTS lis-
tening modes and the Neural Surround
*
listening
mode (*North American models only).
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Selecting Listening Modes
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
RT/PTYTP
STEREO
PURE AUDIO
LISTENING MODE
RANDOM
SUBTITLE
PLAY MODE
AUDIO REPEAT
RC
-
668M
HDDDVD
VCR
LISTENING MODE
DISPLAY
TEST
TONE
CH SEL
SURROUND
STEREO
CINE FLTR
LEVEL
+
LEVEL
-
L NIGHT
AUDYSSEY
SURROUND
STEREO
/
LISTENING
MODE
To Next Page
Loading...
