Onkyo HT-R695

28
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
■ Rear High
Install the Front speakers and Rear High
speakers as shown in the figure to enjoy the Dolby Atmos
listening mode. Install the Rear High speakers on the
upper part of the back wall.
1. Connect the and speakers as shown below
using the FRONT terminals and SURROUND BACK or
HEIGHT terminals.
2. Change the setting on the screen of "2. Speaker" -
"Configuration" in the Setup menu.
■ Dolby Enabled Speaker (Front)
Install the Front speakers and Dolby Enabled
Speakers (Front) as shown in the figure to enjoy the
Dolby Atmos listening mode. Dolby Enabled Speakers are
Height speakers and installed on the top board of the front
speakers.